INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE

LABORATORIES

Heat Transfer Lab | Theory of Machine | Metrology Lab | Thermal Engineering

NCMP Lab. | Metallurgy Lab. | Mechatronics Lab. | Computational Lab.

Central CAD Laboratory | Workshop

*List of Major Equipments / Facilities and list of Experimental Setup for various laboratories are as given below.

Heat Transfer Laboratory

· Emissivity Measurement Apparatus.

· Thermal Conductivity of Metal Bar Apparatus.

· Heat Transfer Through Lagged Pipe Apparatus .

· Parallel flow and Counter flow Heat Exchanger Apparatus.

· Pin/ Fin Apparatus.

· Stefan Boltzman Apparatus.

Theory of Machine Laboratory

· Vibration Laboratory(6 Experiments)

· Universal Governor Apparatus. (4 Experiments)

· Belt Tension Apparatus.( 1 Experiment)

· Motorised Gyroscope. .( 1 Experiment)

· Static Dynamic Balancing Apparatus.( 1 Experiment)

· Various demonstration Models Includes.

Ø Kinematic pairs of CAM and follower.

Ø Model of Interference and undercutting

Ø Generation of Involute Tooth Profile

Ø Cylindrical CAM and Translating follower

Ø Plate CAM and Reciprocating follower.

Ø End CAM Translating follower.

Ø Translating CAM and Reciprocating follower.

Ø Tangent CAM and Oscillating follower.

Metrology Laboratory

· Coordinate Measuring Machine

· Tool Makers Microscope

· Floating Carriage Micrometer Measuring Machine

· Mechanical Comparator

· Profile Projector

· Gear Tooth Caliper

Thermal Engineering Laboratory

· Flash and fire point apparatus.

· Vertical four stroke Diesel Engine Test rig .

· Single Cylinder air Cooled Two Stroke Petrol Engine Test rig

· Two Stage Air Compressor Test Ring.

· Demonstration Models 

Ø Model of Steam Pressure Turbine

Ø Model of Babcock and Wilcox Boiler

Ø Model of Locomotive Boiler

Ø Model of Lancashire Boiler

Ø Model of Cochran Boiler

Ø Model of Water Gauge

Ø Model of Stop Valve

Ø Model of Feed Check Valve

Ø Model of Pressure Gauge

Ø Model of Green Economizer

Ø Model of Super Heater

Ø Model of Blow of Cock

Ø Model of Steam Engine With A Boiler

Ø Model of Two-Stroke Petrol Engine

Ø Model of Two-Stroke Diesel Engine

Ø Model of Four Stroke Petrol Engine

Ø Model of Four Stroke Diesel Engine

Ø Model of Wankle Engine

Ø Refrigeration Tutor.

Ø Separating and Throttling Calorimeter for Steam.

Non conventional Machining Process Laboratory

· Wire-cut EDM

· ECM

· EDM Machine

· Universal Tensile Testing Machine

· ND-YAG Laser Machine

· Micro hardness tester, diamond wheel cutter

· PC controlled X-Y table

· Specimen mounting press

Metallurgy Laboratory

· Muffle furnace

· Microscope

· Specimen preparation machine

· Standard Specimens

· Metallography Kit : Portable Grinder, microscope, polisher and replica kit

Mechatronics Laboratory

Mechatronics setup : LSM controller, X-Y Table, Rotary table and conveyer

Computational Laboratory 

· Dell Optiplex 990, i3 processor, 2GB RAM, 17” TFT monitor, DVD RW (08 Nos.)

· HP Desktop PC dx7200 model Pentium-IV, 1.4 GHz, 256MB RAM, 80GB HDD, 52X Multimedia kit, 17” Color Monitor, AGP Card, PCI Ethernet Card,108 Key Board, Mouse (06 Nos.)

· Intel Pentium-IV, 1.4 GHz, 256MB RAM, 20GB HDD, 52X Multimedia kit, 17” Color Monitor, AGP Card, PCI Ethernet Card,108 Key Board, Mouse (08 Nos.)

· HP P1007 Laser Printer

· Wipro LQ-1070 Dot Matrix Printer

· Softwares Available

o 20-Sim (20 user)

o Tecnomatix - Plant Simulation (04 user)

o e-Factory CAD (04 user)

o DELMIA (03 User)

Central CAD Laboratory

· HP Desktop PC dx7200 model Intel Pentium 4 D processor 820-Dual Core 2.8GHz, 1GB RAM, 160GB HDD, 52X Multimedia kit, 17” Color Monitor (29 Nos.)

· Graphics Work Station HP xw4300 Intel Pentium 4 D processor 840-Dual Core 3.2GHz, 1GB, 160GB HDD, 52X Multimedia kit, 17” Color Monitor (23 Nos.)

· HP 2420 Laser Printer

· HP DesignJet 500 Plotter

· Space Ball

· Softwares Available

o Unigraphics NX4 (25 user)

o Team Center PLM (05 user)

o WITNESS Simulation Software (20 User)

o AutoDesk Inventor Prof. 10 (05 user)

o NASTRAN/PATRAN (02 user)

o ANSYS 11 (05 user)

o Hyperworks 8 (05 user)

o LS-DYNA (02 user)

o ITI Simulation (05 user)

o SolidWorks & COSMOS (10 user)

o TeamCenter Unified (20 user)

· Learning Resources

o GATE 2008

o MSDN AA

WORKSHOP

Machine Shop:

· Lathe Machine

· Milling Machine

· Shaping Machine

· Powarsaw Machine

· Carpentry lathe Machine

· Universal Carpentry Machine

· Tig / Mig Welding Machine

· Gas Welding Set

· Oil filter Machine

· Press Machine

· High speed Cutting Machine

· 3- Phase arc Welding Machine

SPM Shop: 

· Radial Drilling Machine 

· Turret Lathe Machine

· Vertical Milling Machine.

· Grinding Machine